?unique=10d6bdb)
.webp?unique=89d7f6b)
?unique=10d6bdb)
.webp?unique=89d7f6b)
Cruise 3.0 T
- Maximum efficiency outboard with tiller control
- Improved robustness and improved corrosion protection
- 3,000 W input power, in terms of propulsion is comparable with a 6-hp petrol outboard
- Integrated on-board computer with GPS-based range calculation
The new Cruise 3.0 T is a 6 horsepower-equivalent drive system for sailboats up to 30 feet or displacement hulls up to 3 tons.This lightweight electric drive system runs on 24-volts (not included) and is best paired with one or more Power 24-3500 lithium-ion batteries.
Cruise motors are the electric outboard motor of choice for motorboats, dinghies and commercial users.
All Cruise systems have a built-in GPS with onboard computer and display with speed and input power, state of charge and remaining range, with a compact, low-drag, and lightweight pylon with advanced helical gear design.
Also available in remote-steered and fixed pod models.
Cruise 3.0 T – Benefits:
- High-efficiency outboard with 3,000 W input power, equivalent to a 6 HP petrol outboard
- Pair with Power 24-3500 for best performance and accurate range/runtime functionality
- Cruise 3.0 recommended for dinghies and sailboats up to 3 tons
- T model is equipped with tiller control with integrated display screen and magnetic kill switch (included in scope of delivery)
- Rugged pylon with integral fin – extra protection when running aground
- Highest-grade seawater-proof aluminum, hard-anodized for long service life, even in the harshest conditions
- Comprehensive galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with different electrochemical properties - ships with anode set for fresh and saltwater
- Also compatible with third-party batteries (24-volt) but careful matching to motor power requirements is needed
Technical Data Cruise
| Cruise 3.0 T |
|---|---|
| Input power in watts | 3000 |
| Propulsive power in watts | 1530 |
| Comparable petrol outboards (propulsive power) | 6 HP |
| Comparable petrol outboards (thrust) | 8 HP |
| Maximum overall efficiency in % | 51 |
| Static thrust in lbs* | 142 |
| Integrated battery | - |
| Nominal voltage | 24 |
| Final charging voltage | - |
| Total weight in kg | 19.7 (S) / 20.2 (L) |
| Motor weight without battery in kg | - |
| Weight of integrated battery | - |
| Shaft length in cm | 62.5 (S) / 75.5 (L) |
| Standard propeller v = speed in km/h at p = power in watts | Propeller B 12 x 10,5 WDR |
| Alternative propeller options | |
| Propeller Guide | |
| Maximum propeller speed in rpm | 1100 |
| Control | Tiller |
| TorqLink | No |
| Steering | 360° lockable |
| Tilting device | Manual with grounding protection |
| Tilt angle | 61,3° |
| Trim device | Manual, 4-step |
| Integrated on-board computer | Yes |
| Stepless forward/reverse drive | Yes |
* Torqeedo static thrust measurement is based on internationally accepted ISO standards. Static thrust figures for conventional trolling motors are typically measured differently, which results in higher values. To compare Torqeedo static thrust data with conventional trolling motors, add approximately 50% to the Torqeedo static thrust values.
- Impact-resistant aluminium integral fin
- Optimised propeller design: For greater thrust or more speed
- Rugged: aluminium housing with shaft sealant rings on the inside
- Available with short or long shaft – as you need
- The on-board computer display provides information on the most important performance data
THE CRUISE FAMILY
Cruise 3.0 R
≡ 6 HP
Cruise 3.0 T
≡ 6 HP
Cruise 6.0 R TorqLink
≡ 9.9 HP
Cruise 6.0 T
≡ 9.9 HP
Cruise 10.0 T
≡ 20 HP
Cruise 12.0 R TorqLink
≡ 25 HP
